|
编号
|
中文名称
|
英文名称
|
|
ansi lc-1-2005
|
使用波纹不锈钢管(csst)的燃气管道系统
|
fuel gas piping system using corrugated stainless steel tubing (csst) (same as csa 6.26)
|
|
ansi/aga lc-1-1991
|
使用波纹不锈钢管的室内燃气管线系统
|
interior fuel gas piping systems using corrugated stainless steel tubing
|
|
ansi/aga lc-1a-1993
|
使用波纹不锈钢管的室内燃气管线系统
|
interior fuel gas piping systems using corrugated stainless steel tubing
|
|
ansi/aga lc-1b-1994
|
使用波纹不锈钢管的室内燃气管线系统
|
interior fuel gas piping systems using corrugated stainless steel tubing
|
|
ansi/asme a112.19.4m supplement 1-1998
|
搪瓷型钢管子附件设备.补充件1
|
porcelain enameled formed steel plumbing fixtures; supplement 1
|
|
ansi/asme a112.19.4m supplement 2-2000
|
搪瓷型钢管子附件.补充件2
|
porcelain enameled formed steel plumbing fixtures; supplement 2
|
|
ansi/asme b36.10m-2004
|
焊接锻钢管和无缝锻钢管
|
welded and seamless wrought steel pipe
|
|
ansi/asme b36.19m-2004
|
不锈钢管
|
stainless steel pipe
|
|
ansi/astm a182/a 182m-2001
|
高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范
|
specification for forged or rolled alloy-steel pipe flanges, forged fittings, and valves and parts for high-temperature service
|
|
ansi/astm a210-1996
|
锅炉和过热器用中碳素无缝钢管规范
|
specification for seamless medium-carbon steel boiler and superheater tubes
|
|
ansi/astm a213/a 213m-2001
|
锅炉、过热器和热交换器用无缝铁素体和奥氏体合金钢管规范
|
specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes
|
|
ansi/astm a312/a 312m-2001
|
无缝和焊接奥氏体不锈钢管规范
|
specification for seamless and welded austenitic stainless steel pipes
|
|
ansi/astm a450-1996
|
碳素钢管、铁素体合金钢管及奥氏体合金钢管规范
|
specification for general requirements for carbon, ferritic alloy, and austenitic alloy steel tubes
|
|
ansi/astm a523-1996
|
高压管型电缆线路用平端无缝与电阻焊钢管规范
|
specification for plain end seamless and electric-resistance-welded steel pipe for high-pressure pipe-type cable circuits
|
|
ansi/astm a608-1991
|
高温承压设备用离心铸造铁铬镍高合金钢管规范
|
specification for centrifugally cast iron-chromium-nickel high-alloy tubing for pressure application at high temperatures
|
|
ansi/astm a789/a 789m-2001
|
普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范
|
specification for seamless and welded ferritic/austenitic stainless steel tubing for general service
|
|
ansi/astm a814/a 814m-2001
|
冷加工焊接奥氏体不锈钢管规范
|
specification for cold-worked welded austenitic stainless steel pipe
|
|
ansi/astm a815/a 815m-2001
|
锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件规范
|
specification for wrought ferritic, ferritic/austenitic, and martensitic stainless steel piping fittings
|
|
ansi/aws d10.12m/d 10.12-2000
|
焊接低碳钢管指南
|
guide for welding mild steel pipe
|
|
ansi/aws d10.4-1986
|
焊接奥氏体铬镍不锈钢管推荐惯例
|
welding austenitic chromium-nickel stainless steel piping and tubing, recommended practices for
|
|
ansi/aws d18.1-1999
|
卫生洁具用奥氏体不锈钢管和管道的焊接规范
|
specification for welding of austenitic stainless steel tube and pipe systems in sanitary (hygenic) applications
|
|
ansi/aws d18.2-1999
|
奥氏体不锈钢管内部焊接褪色度指南
|
guide to weld discoloration levels on inside of austenitic stainless steel tube
|
|
ansi/awwa c203-2002
|
给水钢管煤焦油保护涂层和内衬.热用搪瓷和胶带
|
coal-tar protective coatings and linings for steel water pipelines - enamel and tape - hot-applied
|
|
ansi/awwa c208-2001
|
预制给水钢管配件尺寸
|
fabricated steel water pipe fittings, dimensions for
|
|
ansi/awwa c213-2001
|
给水钢管的内、外层熔化粘结环氧涂层
|
fusion-bonded epoxy coating for the interior and exterior of steel water pipelines
|
|
ansi/awwa c214-2007
|
供水钢管外部胶带包覆系统
|
tape coating systems for the exterior of steel water pipelines
|
|
ansi/awwa c216-2007
|
给水钢管用专用部件、连接件和配件外部可热收缩交联的聚烯烃涂层
|
heat-shrinkable cross-linked polyolefin coatings for the exterior of special sections, connections, and fittings for steel water pipelines
|
|
ansi/awwa c217-1999
|
供水钢管道专用型钢、连接件和配件外部低温矿脂带和矿脂腊油带包覆层
|
cold-applied petrolatum tape and petroleum wax tape coating for the exterior of special sections, connections, and fittings for buried steel water pipelines
|
|
ansi/awwa c220-1998
|
4in(100mm)及以上尺寸的不锈钢管
|
stainless steel pipe 4 in (100 mm) and larger
|
|
ansi/awwa c220a-1999
|
不锈钢管.4英寸.(100 mm) 及更大. ansi/awwa c220a-98的附录
|
stainless steel pipe, 4 in. (100 mm) and larger, addendum to ansi/awwa c220a-98
|
|
asme a112.19.4m supplement 2-2
|
搪瓷铸钢管道固定件.补充件2
|
(porcelain enameled formed steel plumbing fixtures - supplement 2)
|
|
asme a112.19.4m-1994
|
搪瓷铸钢管道固定件
|
(porcelain enameled formed steel plumbing fixtures)
|
|
asme b36.19m-1985
|
不锈钢管
|
(stainless steel pipe)
|
|
astm a 1016/a 1016ma-2004
|
铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范
|
standard specification for general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes
|
|
astm a 1019/a 1019m-2001
|
排污和排水用聚合物预涂的直径为36英寸或不足36英寸的闭合肋钢管的标准规范
|
standard specification for closed rib steel pipe with diameter of 36 in. [900 mm] or less, polymer precoated for sewers and drains
|
|
astm a 1020/a 1020m-2002
|
锅炉、加热器、热交换器和冷凝器装置的熔焊碳素和碳锰钢管的标准规范
|
standard specification for steel tubes, carbon and carbon manganese, fusion welded, for boiler, superheater, heat exchanger and condenser applications
|
|
astm a 1024/a 1024m-2002
|
无缝平头黑色钢管线标准规范
|
standard specification for steel line pipe, black, plain-end, seamless
|
|
astm a 1037/a 1037m-2005
|
炉对焊黑色钢管线的标准规范
|
standard specification for steel line pipe, black, furnace-butt-welded
|
|
astm a 1042/a 1042m-2004
|
排污和排水用复合波纹状钢管的标准规范
|
standard specification for composite corrugated steel pipe for sewers and drains
|
|
astm a 1053/a 1053m-2006
|
焊接的铁素体马氏体不锈钢管的标准规范
|
standard specification for welded ferritic-martensitic stainless steel pipe
|
|
astm a 106/a 106ma-2006
|
高温设施用无缝碳钢管的标准规范
|
standard specification for seamless carbon steel pipe for high-temperature service
|
|
astm a 134-1996
|
电熔(电弧)焊钢管(nps为16英寸和16英寸以上)的标准规范
|
standard specification for pipe, steel, electric-fusion (arc)-welded (sizes nps 16 and over)
|
|
astm a 135/a 135m-2006
|
电阻焊接钢管的标准规范
|
standard specification for electric-resistance-welded steel pipe
|
|
astm a 139/a 139m-2004
|
电熔焊接钢管用标准规范
|
standard specification for electric-fusion (arc)-welded steel pipe (nps 4 and over)
|
|
astm a 179/a 179ma-1990
|
热交换器和冷凝器用无缝冷拉低碳钢管标准规范
|
standard specification for seamless cold-drawn low-carbon steel heat-exchanger and condenser tubes
|
|
astm a 182/a 182ma-2007
|
高温设备用锻制或轧制合金和不锈钢管法兰、锻制配件、阀门及零件的标准规范
|
standard specification for forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service
|
|
astm a 209/a 209m-2003
|
锅炉和过热器用无缝碳钼合金钢管标准规范
|
standard specification for seamless carbon-molybdenum alloy-steel boiler and superheater tubes
|
|
astm a 214/a 214m-1996
|
热交换器与冷凝器用电阻焊接碳素钢管的标准规范
|
standard specification for electric-resistance-welded carbon steel heat-exchanger and condenser tubes
|
|
astm a 234/a 234m-2007
|
中温与高温设备用锻制碳素钢和合金钢管道配件的标准规范
|
standard specification for piping fittings of wrought carbon steel and alloy steel for moderate and high temperature service
|
|
astm a 252-1998
|
焊接钢和无缝钢管桩的标准规范
|
standard specification for welded and seamless steel pipe piles
|
|
astm a 254-1997
|
铜焊钢管规格的标准规范
|
standard specification for copper-brazed steel tubing
|
|
astm a 268/a 268ma-2005
|
通用无缝和焊接铁素体与马氏体不锈钢管的标准规范
|
standard specification for seamless and welded ferritic and martensitic stainless steel tubing for general service
|
|
astm a 269a-2007
|
通用无缝和焊接奥氏体不锈钢管的标准规范
|
standard specification for seamless and welded austenitic stainless steel tubing for general service
|
|
astm a 270a-2003
|
卫生设施用无缝和焊接奥氏体不锈钢管的标准规范
|
standard specification for seamless and welded austenitic stainless steel sanitary tubing
|
|
astm a 312/a 312m-2007
|
无缝、焊接和强冷压奥氏体不锈钢管的标准规范
|
standard specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes
|
|
astm a 333/a 333m-2005
|
低温设备用无缝和焊接钢管的标准规范
|
standard specification for seamless and welded steel pipe for low-temperature service
|
|
astm a 334/a 334ma-2004
|
低温设备用无缝和焊接碳素和合金钢管的标准规范
|
standard specification for seamless and welded carbon and alloy-steel tubes for low-temperature service
|
|
astm a 335/a 335m-2006
|
高温设备用无缝铁素体合金钢管的标准规范
|
standard specification for seamless ferritic alloy-steel pipe for high-temperature service
|
|
astm a 358/a 358m-2005
|
高温设备和通用电熔焊奥氏体铬镍不锈钢管标准规范
|
standard specification for electric-fusion-welded austenitic chromium-nickel stainless steel pipe for high-temperature service and general applications
|
|
astm a 369/a 369m-2006
|
高温设备用锻制和镗加工碳素钢管和铁素体合金钢管标准规范
|
standard specification for carbon and ferritic alloy steel forged and bored pipe for high-temperature service
|
|
astm a 376/a 376m-2006
|
高温中心站设备用无缝奥氏钢管标准规范
|
standard specification for seamless austenitic steel pipe for high-temperature central-station service
|
|
astm a 381-1996
|
高压输送用金属弧焊钢管的标准规范
|
standard specification for metal-arc-welded steel pipe for use with high-pressure transmission systems
|
|
astm a 403/a 403m-2007
|
锻造奥氏体不锈钢管道系统配件用标准规范
|
standard specification for wrought austenitic stainless steel piping fittings
|
|
astm a 409/a 409m-2001
|
腐蚀场所或高温下使用的焊接大口径奥氏体钢管标准规范
|
standard specification for welded large diameter austenitic steel pipe for corrosive or high-temperature service
|
|
astm a 423/a 423m-1995
|
无缝和电焊低合金钢管的标准规范
|
standard specification for seamless and electric-welded low-alloy steel tubes
|
|
astm a 426/a 426m-2007
|
高温设备用离心浇铸铁素体合金钢管的标准规范
|
standard specification for centrifugally cast ferritic alloy steel pipe for high-temperature service
|
|
astm a 450/a 450ma-2004
|
碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范
|
standard specification for general requirements for carbon, ferritic alloy, and austenitic alloy steel tubes
|
|
astm a 451/a 451m-2006
|
高温设备用离心铸造奥氏体钢管的标准规范
|
standard specification for centrifugally cast austenitic steel pipe for high-temperature service
|
|
astm a 513-2007
|
电阻焊碳素钢与合金钢机械钢管的标准规范
|
standard specification for electric-resistance-welded carbon and alloy steel mechanical tubing
|
|
astm a 520-1997
|
符合iso 锅炉结构推荐标准规定的高温用无缝和电阻焊碳素钢管形产品的补充要求
|
supplementary requirements for seamless and electric-resistance-welded carbon steel tubular products for high-temperature service conforming to iso recommendations for boiler construction
|
|
astm a 523-1996
|
高压管型电缆线路用平端无缝与电阻焊钢管的标准规范
|
standard specification for plain end seamless and electric-resistance-welded steel pipe for high-pressure pipe-type cable circuits
|
|
astm a 524-1996
|
常温和低温用无缝碳素钢管的标准规范
|
standard specification for seamless carbon steel pipe for atmospheric and lower temperatures
|
|
astm a 53/a 53m-2007
|
黑色和热浸镀锌焊接及无缝钢管的标准规范
|
standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless
|
|
astm a 530/a 530ma-2004
|
专用碳素钢和合金钢管一般要求的标准规范
|
standard specification for general requirements for specialized carbon and alloy steel pipe
|
|
astm a 587-1996
|
化学工业用电阻焊低碳钢管的标准规范
|
standard specification for electric-resistance-welded low-carbon steel pipe for the chemical industry
|
|
astm a 595/a 595m-2006
|
建筑用锥形、高强度低合金或低碳钢管的标准规范
|
standard specification for steel tubes, low-carbon or high-strength low-alloy, tapered for structural use
|
|
astm a 608/a 608m-2006
|
高温压力设备用离心铸造的铁铬镍高合金钢管标准规范
|
standard specification for centrifugally cast iron-chromium-nickel high-alloy tubing for pressure application at high temperature
|
|
astm a 618/a 618m-2004
|
热塑焊接和无缝高强度低合金结构钢管的标准规范
|
standard specification for hot-formed welded and seamless high-strength low-alloy structural tubing
|
|
astm a 632-2004
|
通用无缝和焊接奥氏体不锈钢管(小直径)标准规范
|
standard specification for seamless and welded austenitic stainless steel tubing (small-diameter) for general service
|
|
astm a 660-1996
|
高温用离心铸造碳素钢管的标准规范
|
standard specification for centrifugally cast carbon steel pipe for high-temperature service
|
|
astm a 671-2006
|
常温和较低温用电熔焊钢管的标准规范
|
standard specification for electric-fusion-welded steel pipe for atmospheric and lower temperatures
|
|
astm a 672-2006
|
中温高压用电熔焊钢管的标准规范
|
standard specification for electric-fusion-welded steel pipe for high-pressure service at moderate temperatures
|
|
astm a 691-1998
|
高温下高压装置用电熔焊碳素钢和合金钢管的标准规范
|
standard specification for carbon and alloy steel pipe, electric-fusion-welded for high-pressure service at high temperatures
|
|
astm a 714-1999
|
高强度低合金焊接和无缝钢管的标准规范
|
standard specification for high-strength low-alloy welded and seamless steel pipe
|
|
astm a 742/a 742m-2003
|
波纹钢管用预涂聚合物和金属涂覆钢薄板的标准规范
|
standard specification for steel sheet, metallic coated and polymer precoated for corrugated steel pipe
|
|
astm a 758/a 758m-2000
|
具有改进的切口韧性的对缝焊锻制碳素钢管配件标准规范
|
standard specification for wrought-carbon steel butt-welding piping fittings with improved notch toughness
|
|
astm a 760/a 760m-2006
|
下水道和排水沟用金属涂覆波纹钢管标准规范
|
standard specification for corrugated steel pipe, metallic-coated for sewers and drains
|
|
astm a 762/a 762m-2000
|
下水道和排水沟用预涂聚合物波纹钢管标准规范
|
standard specification for corrugated steel pipe, polymer precoated for sewers and drains
|
|
astm a 778-2001
|
焊接未退火的奥氏体不锈钢管形制品标准规范
|
standard specification for welded, unannealed austenitic stainless steel tubular products
|
|
astm a 789/a 789mb-2005
|
通用无缝和焊接铁素体/奥氏体不锈钢管的标准规范
|
standard specification for seamless and welded ferritic/austenitic stainless steel tubing for general service
|
|
astm a 790/a 790m-2007
|
无缝和焊接铁素体/奥氏体不锈钢管的标准规范
|
standard specification for seamless and welded ferritic/austenitic stainless steel pipe
|
|
astm a 795/a 795m-2007
|
消防用黑色和热浸镀锌焊接钢管及无缝钢管用标准规范
|
standard specification for black and hot-dipped zinc-coated (galvanized) welded and seamless steel pipe for fire protection use
|
|
astm a 796/a 796m-2006
|
雨水、卫生污水和其它地下设施用波纹钢管、管拱和拱的结构设计标准实施规范
|
standard practice for structural design of corrugated steel pipe, pipe-arches, and arches for storm and sanitary sewers and other buried applications
|
|
astm a 798/a 798m-2007
|
污水管及其它类似用途用工厂制波纹钢管安装的标准实施规程
|
standard practice for installing factory-made corrugated steel pipe for sewers and other applications
|
|
astm a 810-2001
|
热浸镀锌钢管用绕网标准规范
|
standard specification for zinc-coated (galvanized) steel pipe winding mesh
|
|
astm a 813/a 813m-2007
|
单或双焊接奥氏体不锈钢管的标准规范
|
standard specification for single- or double-welded austenitic stainless steel pipe
|
|
astm a 814/a 814m-2007
|
冷加工焊接奥氏体不锈钢管的标准规范
|
standard specification for cold-worked welded austenitic stainless steel pipe
|
|
astm a 815/a 815ma-2007
|
锻制铁素体、铁素体/奥氏体和马氏体不锈钢管道系统配件的标准规范
|
standard specification for wrought ferritic, ferritic/austenitic, and martensitic stainless steel piping fittings
|
|
astm a 822/a 822m-2004
|
液压系统设备用无缝冷拔碳素钢管的标准规范
|
standard specification for seamless cold-drawn carbon steel tubing for hydraulic system service
|
|
astm a 865/a 865m-2006
|
钢管接头用黑色或镀锌焊接或无缝钢螺纹联接套筒的标准规范
|
standard specification for threaded couplings, steel, black or zinc-coated (galvanized) welded or seamless, for use in steel pipe joints
|
|
astm a 872/a 872ma-2007
|
腐蚀环境用离心铸铁素体/奥氏体不锈钢管的标准规范
|
standard specification for centrifugally cast ferritic/austenitic stainless steel pipe for corrosive environments
|
|
astm a 928/a 928m-2005
|
填充金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范
|
standard specification for ferritic/austenitic (duplex) stainless steel pipe electric fusion welded with addition of filler metal
|
|
astm a 929/a 929m-2001
|
波纹钢管用的经热浸处理的金属镀覆薄钢板标准规范
|
standard specification for steel sheet, metallic-coated by the hot-dip process for corrugated steel pipe
|
|
astm a 943/a 943m-2001
|
喷模制无缝奥氏体不锈钢管的标准规范
|
standard specification for spray-formed seamless austenitic stainless steel pipes
|
|
astm a 949/a 949m-2001
|
喷模制无缝铁素体/奥氏体不锈钢管的标准规范
|
standard specification for spray-formed seamless ferritic/austenitic stainless steel pipe
|
|
astm a 960/a 960m-2007
|
锻钢管道配件的一般要求用标准规范
|
standard specification for common requirements for wrought steel piping fittings
|
|
astm a 978/a 978m-1997
|
预涂覆和聚乙烯复合肋式钢管标准规范
|
standard specification for composite ribbed steel pipe, precoated and polyethylene lined for gravity flow sanitary sewers, storm sewers, and other special applications
|
|
astm a 998/a 998m-1998
|
下水道和其他用途工厂制波纹钢管中配件用钢筋的结构设计标准实施规范
|
standard practice for structural design of reinforcements for fittings in factory - made corrugated steel pipe for sewers and other applications
|
|
astm a 999/a 999ma-2004
|
合金钢及不锈钢管一般要求的标准规范
|
standard specification for general requirements for alloy and stainless steel pipe
|
|
astm b 861a-2006
|
钛和钛合金无缝钢管的标准规范
|
standard specification for titanium and titanium alloy seamless pipe
|
|
astm c 1610/c 1610ma-2006
|
用钢管混凝土柱技术的自密实混凝土的静态析离标准试验方法
|
standard test method for static segregation of self-consolidating concrete using column technique
|
|
astm e 570-1997
|
铁磁钢管形制品的磁力泄漏检验
|
standard practice for flux leakage examination of ferromagnetic steel tubular products
|
|
astm f 1083-2006
|
栅栏结构用热浸镀锌焊接钢管的标准规范
|
standard specification for pipe, steel, hot-dipped zinc-coated (galvanized) welded, for fence structures
|
|
astm f 2181a-2002
|
外科植入物用锻造的无缝不锈钢管的标准规范
|
standard specification for wrought seamless stainless steel tubing for surgical implants
|
|
astm f 2408-2007
|
用电镀钢管柱装饰栅栏的标准规范
|
standard specification for ornamental fences employing galvanized steel tubular pickets
|
|
astm f 2589-2006
|
使用钢管柱装饰围栏的标准规范
|
standard specification for ornamental fences employing steel tubular pickets
|
|
编号
|
中文名称
|
英文名称
|